ECU and TCU Programming Device Launch X-431
Manufacturer: Launch, warranty period – 24 months
Launch X-431 ECU & TCU is a professional programming device designed for fast and precise reading and writing of engine (ECU) and transmission (TCU) control unit data. The device supports EEPROM and FLASH data backup, recovery, data processing, and anti-theft system deactivation. With a wide range of supported manufacturers and a set of special adapters, it is an ideal tool for automotive workshops, electronics specialists, and programmers working with various vehicle brands.
Functions:
- Fast ECU and TCU data reading and writing
- Supports two different reading methods depending on the vehicle brand
- Allows chip ID reading, EEPROM, and FLASH data backup creation
- Ability to restore EEPROM/FLASH data after repair or software failure
- Supports data processing, anti-theft shutdown, and file verification functions
- Works with ECUs from various manufacturers, including Bosch, Continental, Siemens, Delco, Getrag, Temic, and ZF
- Compatible with Launch X-PROG3 programmer and other Launch X-431 series devices
- Suitable for both ECM (engine control) and TCM (transmission control) systems
Technical specifications:
- Interface: DB26, DB15
- Input voltage: DC 12V
- Operating current: 500 mA
- Power: 5 W
- Operating temperature: 0°C – 50°C
- Storage temperature: -20°C – 70°C
- Supported control units: Bosch, Continental, Siemens, Delco, ZF, Getrag, Temic
- Supported ECU types: ECM, TCM
Supported products:
- EDC16XX / ECM / Bosch / G3 / Flex
- EDC17XX / ECM / Bosch / G3 / Flex
- MD1CSXXX / ECM / Bosch / G3 / Flex
- MD1CPXXX / ECM / Bosch / G3 / Flex
- ME17.X.X / ECM / Bosch / G3 / Flex
- MED17.X.X / ECM / Bosch / G3 / Flex
- MED9.X.X / ECM / Bosch / G3 / Flex
- MEV17.X.X / ECM / Bosch / G3 / Flex
- MEVD17.X.X / ECM / Bosch / G3 / Flex
- MG1CSXXX / ECM / Bosch / G3 / Flex
- MG1CPXXX / ECM / Bosch / G3 / Flex
- MSDXX / ECM / Continental – Siemens / G3 / Flex
- MSVXX / ECM / Continental – Siemens / G3 / Flex
- SDIX / ECM / Continental / G3 / Flex
- GM EXX-TXX / ECM / DELCO / G3 / Flex
- SIM271XX / ECM / Continental / G3 / Flex
- SIMOS12.X / ECM / Continental / Flex
- SIMOS8.X / ECM / Continental / G3 / Flex
- SIMOS-PRC2.X / ECM / Continental / Flex
- 6HPXX / TCM / ZF / G3 / Flex
- 8HPXX / TCM / ZF / G3 / Flex
- 7DCT300 / TCM / ZF / G3 / Flex
- 9G Tronic / TCM / Bosch / G3 / Flex
- ALXXX / TCM / ZF / G3 / Flex
- TCXX / TCM / Bosch / G3 / Flex
- DPS6/DC4 / TCM / Getrag / G3 / Flex
- DKG / TCM / Getrag / G3 / Flex
- DLXXX / TCM / Temic / G3 / Flex
- DQXXX / TCM / Temic / G3 / Flex
- MPS6 / TCM / Getrag / G3 / Flex
- SPS6 / TCM / Getrag / G3 / Flex
- VGSX / TCM / Getrag / G3 / Flex
- VL381 / TCM / Temic / G3 / Flex
- GM 6TXX/6LXX / TCM / Delco / G3 / Flex
- MEDG17.9.8 / TCM / Bosch / G3 / Flex
- MEG17.9.2 / TCM / Bosch / G3 / Flex
Package contents:
- Launch X-431 ECU/TCU programming device
- Special adapters and connectors
- MCU cable
- EU connector
- Power supply cable
- USB cable
The Launch X-431 ECU & TCU programmer is a reliable and versatile solution for professionals seeking maximum control when working with ECU and TCU systems. The device ensures precise data management, safe programming, and fast operation – an investment in quality, efficiency, and durability that enhances your workshop’s capabilities.
